🍾 Check Out the Best : "₿itcoin Miners" & "Aleo Miners"

How to Set Up ElphaPex DG1+?

Share

Array

TABLE OF CONTENT

    SUMMARY

    ElphaPex DG1+ mining the Scrypt algorithm has a maximum hash rate of 14400Mh/s at a power consumption of 3950W. Built with an efficient air cooling system, DG1+ aids instant heat dissipation and effective cooling. Thus, ElphaPex DG1+ gives an excellent energy efficiency of 0.27j/Mh.

    Now, how to set up ElphaPex DG1+? Setting up ElphaPex DG1+ is pretty straightforward, like most ASICs. Here is a quick setup guide for ElphaPex DG1+ with detailed step-by-step instructions and images that users can refer to. Almost anyone can set up DG1+ as it is a simple plug-and-play ASIC.

    What’s inside the Shipment Box?

    • ElphaPex DG1+ comes in a thick cardboard box, safely padded with thick foam pieces on top and bottom to prevent any damage to ASIC during shipping.

    Thick cardboard box - 1

    • Carefully remove the foam pieces and place the ASIC on a flat surface.

    ASIC on a flat surface - 2

    Step-by-step Instructions for Setting Up the ElphaPex DG1+

    1. Preparing the ASIC

    • Like most ASICs, ElphaPex DG1+ also demands a high power of 3950W. Hence, a regular North American home power supply won’t work. You will need a dedicated power infrastructure to operate your ElphaPex DG1+.
    • You will need 240V power. Hence, collaborate with a certified electrician and get an L6-30R receptacle plug, and 240V, 30A PDU. The circuit and PDU won’t come with the ASIC. You have to order them separately.

    L6-30R receptacle plug - 3

    The circuit and PDU - 4

    • Like most ASICs, ElphaPex DG1+ does not have wifi support. Thus, you will need a hardwire ethernet cable for your DG1+.

    hardwire ethernet cable for your DG1+ - 5

    • Next is to place the ASIC in a well-ventilated place to exhaust all the heat generated during the crypto mining process.
    • You will also need two power cables, C-19 to C-20, as the ASIC won’t come with power cables.

    two power cables, C-19 to C-20 - 6

    • Plug the one end of the cable into ASIC and the other end into the PDU.

    Plug the cable into the ASIC - 7

    other end into the PDU - 8

    • The ASIC will start once the power connection is established. You can see the lights blinking.

    You can see the lights blinking - 9

    2. Configuring the ASIC

    • The next step is to find the IP address of your ElphaPex DG1+. You can get the IP address using either of the following steps.

    ~ You can use the free program software called Advanced IP Scanner to get your miner’s IP address.
    ~ Alternatively, you can log in to your router and get the IP address.
    Here, let’s take the advanced IP scanner for illustration. The software automatically scans your IP address. You can copy that address.

    You can copy that address - 10

    3. Accessing the ElphaPex DG1+ via the Web Browser

    • Paste the copied address into the web browser.

    Paste the copied address into the web browser - 11

    • It will take you to the page asking for a username and password. The default username and password is “root.”

    default username and password is root - 12

    • As you log in, you can access the web GUI of the ElphaPex DG1+.

    You can access the web GUI of the ElphaPex DG1+ - 13

    4. Adding the Mining Pool

    • There are mining pools you can partner with to mine Dogecoin. If you’re not sure which mining pool to add, you can check the MiningPoolStats.Stream. You can pick any mining pool of your choice.
    • Here, let’s take Kryptex for illustration. Go to Kryptex.com. Here you can choose Litecoin/Dogecoin and click on the “Start mining” button.

    “Start mining” button - 14

    • Now, you can copy the mining pool address and paste it into the pool settings page.

    copy the mining pool address - 15

    paste it into the pool settings page - 16

    • Next, you can copy the backup pool and paste it into the second tab.

    you can copy the backup pool - 17

    paste it into the second tab - 18

    • You can copy the first mining pool address itself and paste it into the third tab, as there are no other backup mining pool options available here.
    • Next is to add the worker’s name. For that you will need a Litecoin or Dogecoin wallet. It is highly recommended to get a Tangem wallet to store your Litecoin/Dogecoin.
    • Once you get your wallet, you have to copy that wallet address and paste it into the user name tab. Then add a worker name separated by a period. Here the worker’s name is dg1plus02.

    paste it into the user name tab - 19

    • You can copy and paste the same worker’s name on all three tabs. Likewise, you can give any password of your choice. Here the password given is “X’. Once you entered all the details, hit on the Save button.

    5. Start Mining

    • The miner should start mining immediately. You can check the mining status in real-time on its dashboard.

    check the mining status in real-time on its dashboard - 20

    • Alternatively, you can also check your mining status by pasting your Litecoin address on the Kryptex website, as shown below.

    heck your mining status by pasting your Litecoin address on the Kryptex website - 21

    check with full details - 22

    • The power consumption of ElphaPex DG1+ here is 3953W, and the hash rate is around 14518MH/s as advertised. It might vary slightly in your case, depending on your mining atmosphere.

    ElphaPex DG1+ here is 3953W - 23

    hash rate is around 14518MHs - 24

    For the non-readers, we made a feature film!
    Check out how to Setup ElphaPex DG1+

    CONCLUSION

    Launched recently in April 2024, ElphaPex DG1+ is an advanced Scrypt miner with a maximum hash rate of 14400Mh/s at a power consumption of only 3950W. Equipped with four high-speed fans, ElphaPex DG1+ gives an excellent energy efficiency of 0.27j/Mh.

    Industry-standard design, efficient air cooling system, and high hash rate are some of the notable features of ElphaPex DG1+. It lets you mine both Dogecoin and Litecoin. Hope with this detailed blog, you can set up your ElphaPex DG1+ effortlessly. If you face any hiccups while setting up, check out the video tutorial at the end of this article.

    Check out the latest Scrypt Miners

    FAQs ON ELPHAPEX DG1+

    • What is the profitability of ElphaPex DG1+?

      Predicting the mining profitability of any specific mining hardware is challenging. However, reliable websites like Mining Now that exclusively deal with ASIC miners are your best bet to know the profitability of any ASIC miner. Here is what Mining Now says about the mining profitability of ElphaPex DG1+.

    • Can we mine both Litecoin and Dogecoin with ElphaPex DG1+?

      Yes. You can mine both Litecoin and Dogecoin using ElphaPex DG1+. All you need to do is select the cryptocurrency first and partner with the suitable mining pool that supports your preferred cryptocurrency.

    Join our Newsletter

    Get the week’s best cryptomining content in your inbox.

    Share

    Array
    Han su

    Han Su is a technical analyst at CryptoMinerBros, a leading provider of cryptocurrency mining hardware. He has over 5 years of experience in the cryptocurrency industry and is an expert in mining hardware, software, and profitability analysis.

    Han is responsible for the technical analysis and research on ASIC Mining at Crypto Miner Bros. He also writes in-depth blogs on ASIC mining and cryptocurrency mining, and he has a deep understanding of the technology. His blogs are informative and engaging, and they have helped thousands of people learn about cryptocurrency mining.

    He is always looking for new ways to educate people about cryptocurrency, and he is excited to see how the technology continues to develop in the years to come.

    In spare time, Han enjoys hiking, camping, and spending time with his family. He is also an avid reader, and he loves to learn about new things.

    Similar Blogs

    Copied link to Clipboard